INTEGRATED SOLAR STREETLIGHTS
PAD Series
> Models: 30W, 40W, 50W, 60W, 80W, 100W, 120W
> Lumen: 170 LM/W
> Color temperature: 3000K, 4000K, 5000K, 6000K, 70000K
> LiFePO4 Lithium Battery
> Service life: 100,000 hours
> Charging time: 6 hours with bright sunlight, 12 hours with cloudy and rainy days
> Viewing angle 140°
> 12 hours of lighting per day with motion sensor
> Working temperature -30°C - +70°C
> Remote control
> Certifications: CE, ROHS, IP65, ISO9001
> 3-year warranty
The solar panel converts sunlight into electricity, which is stored in the lithium battery via the controller. Thanks to the twilight sensor, the device is able to turn on independently as soon as the sun sets, while turning off the moment sunrise appears. The PAD series has an integrated design with a glueless lamp body; compared with any other street lamp that does not allow individual parts to be removed, in this series each part is very easy to remove and replace. All cables use waterproof male and female connectors, and all connectors have a label so as to avoid incorrect connections.
Features:
- The solar panel, led chip, charge controller and battery are enclosed in a professionally designed box.
- Die-cast aluminum forming and anodic oxidation treatment give excellent resistance to high temperatures and corrosion.
- With Intelligent power regulation, automatic judgment of weather, reasonable planning of discharge discipline
- The long-distance smart remote control and UVA technology, gives a choice of 4 lighting modes and allows you to adjust the brightness.
- With intelligent discharge management,Charge and discharge soft and hard dual protection and intelligent equalization technology,deep cycle more than 2000times.
- The lamp achieves 170LM/W, more than twice the average brightness of ordinary LED sources; the viewing angle is 140 degrees.
- IP65 waterproof rating.
High-efficiency monocrystalline solar panel:
The PAD series streetlights use a panel made of high-efficiency monocrystalline silicon, which is widely used in space and satellite stations; its conversion rate can reach 21%, over 20%-30% compared to polycrystalline silicon, so they allow for faster charging.
LifePO4 Battery:
PAD series streetlights use LifePO4 level A1 battery with more than 2000 charge cycles, high temperature resistance, and double protection:
- The intelligent controller and LifePO4 battery are equipped with system temperature control: when the temperature reaches the set limit value (60° C), they will turn off at the same time.
- An explosion-proof valve is added between each cell of the lithium battery pack, which prevents it from exploding.
Intelligent microwave induction:
The PAD streetlight uses smart microwave induction with a sensor more than 12 m away (two to three times more than the traditional PIR motion sensor), ensuring effective lighting and environmental and energy savings.
JKC Economic Series
> Models: 30W, 40W, 50W, 60W, 80W, 100W, 120W
> Lumen: 150 LM/W
> Color temperature: 3000K, 4000K, 5000K, 6000K, 70000K
> LiFePO4 Lithium Battery
> Service life: 60,000 hours
> Charging time: 6 hours with bright sunlight, 12 hours with cloudy and rainy days
> Viewing angle 140°
> 12 hours of lighting per day with motion sensor
> Working temperature -30°C - +70°C
> Remote control 1 pc each lamppost block ordered
> Certifications: CE, ROHS, IP65.
> 3-year warranty
The solar panel converts sunlight into electricity, which is stored in the lithium battery via the controller. Thanks to the twilight sensor, the device is able to turn on independently as soon as the sun sets, while turning off the moment sunrise appears.
JKC's integrated solar streetlights, with American Bridgelux LED source, provide excellent light efficiency of up to 150 lm/w and maintain permanent stability as well as a comfortable viewing experience. Each LED has an anti-static protection element, so that damage caused by static electricity is avoided as much as possible.
The sensor, with controlled body induction technology, can store energy during daylight and modulate the brightness of the lamp when people pass by at night. During the night, the sensor will work automatically: it will be in full brightness mode when people pass by, and in power-saving mode once they pass by. (The lighting mode can be adjusted according to customers' needs). The integrated design makes the light simple, elegant and practical.
The device can be adjusted to different angles, depending on latitude and terrain characteristics; it can be installed vertically and horizontally or on the wall.
The lithium battery is compressed and has three main characteristics: small size, high capacity, and long service life.
